Hydrogen Generator Inhalation Ionizer 150Ml H2+75Ml O2 Hydrogen Water Purifier High Purity H2 Low Noise SPE/PEM

Hydrogen Generator Inhalation Ionizer 150Ml H2+75Ml O2 Hydrogen Water Purifier High Purity H2 Low Noise SPE/PEM

Silver / Au / 110V-240V
$639.99
Skip to product information
Hydrogen Generator Inhalation Ionizer 150Ml H2+75Ml O2 Hydrogen Water Purifier High Purity H2 Low Noise SPE/PEM

Hydrogen Generator Inhalation Ionizer 150Ml H2+75Ml O2 Hydrogen Water Purifier High Purity H2 Low Noise SPE/PEM

$639.99
Color
Plug Type
Voltage

Hydrogen Generator Inhalation Ionizer 150Ml H2+75Ml O2 Hydrogen Water Purifier High Purity H2 Low Noise SPE/PEM

Hydrogen Generator Inhalation Ionizer 150Ml H2+75Ml O2 Hydrogen Water Purifier High Purity H2 Low Noise SPE/PEM uses the latest SPE (Solid Poly Electrolytic technology) + PEM (Proton Exchange Membrane) dual chamber solution to provide high-purity hydrogen and oxygen gas. The machine must use distilled water (pure water TDS is less than 5) to work properly, offers strong pressure resistance and strong hydrogen production ability, and does not produce harmful gases such as residual chlorine and ozone. It is designed for simple operation with a single on/off button and timed working modes, allows both hydrogen inhalation and hydrogen water drinking, and delivers stable performance with long service life and smart protection functions.

Specifications

  • Output gas: 99.99% purity of Hydrogen gas and Oxygen gas

  • Output flow rate: 150ml/min Hydrogen gas and 75ml/min Oxygen gas

  • Input source: Distilled water only (water TDS<5)

  • Input source capacity: 550ml, 10ml/hour consumption

  • Function: Single on/off button

  • Power range: 5~90W

  • Standby power: approx. 1W

  • Inlet pressure: 0.1~0.3Mpa

  • Inlet water TDS: 80~1000mg/L

  • Starting water flow: 0.8L/min

  • Optimal working flow: 2~3L/min

  • Continuous electrolytic time: about 60 minutes

  • Function gears: Alkaline 4 files, 1 water purifying, 1st acid

  • Electrode material: Titanium platinum coating

  • Electrode size: 79 x 43 mm

  • Number of electrodes: 5 pieces

  • PH range: 4.5-10

  • ORP range: 300 - 500mV

  • Maximum inlet temperature: 45 degrees

  • Gross weight: 3.5kg

  • Size: 258 x 170 x 110 mm

  • Use: Pitcher

  • Origin: Mainland China

  • CN: Guangdong

  • Material: ABS

  • Water treatment machine type: Water Purifier

  • High-concerned chemical: None

  • Installation: Wall Mounting Type

  • Choice: yes

Features

  • High Purity: Hydrogen purity is more than 99.99%,meeting food additive standards.

  • Sufficient Actual Flow Rate: Output is consistent with declared flow values.

  • Non-humidification Bottle: No humidification bottle required, preventing bacteria growth and reduced purity.

  • Strong Heat Dissipation: Unique heat sink maintains safe operating temperature.

  • Long Service Life: 8000~10000 hours or more.

  • Stable Performance: Long-term use does not reduce flow rate or purity.

  • Smart Protection: Auto-stop at low water levels to avoid damage.

  • Assurance: Backed by 15+ years of R&D and support experience.

Usage Instructions

  • Power on and timing: Press once to start 1-hour mode.

  • 2-hour mode: Press again during operation.

  • 3-hour mode: Press twice for 3-hour mode.

  • Stop working: Press three times.

  • Shutdown: Long press 3 seconds.

  • Water requirement: Must use distilled water (TDS < 5).

Usage Modes

  • Two ways to use: Inhale hydrogen air + drink hydrogen water.

Package Contents

  • Included items: 1 x Water Ionizer, 1 x Adaptor, 1 x Hanger, 1 x Washer, 1 x Top Assembly, 2 x Rubber Tube Clips, 1 x Water inlet disposal tube, 1 x English Manual.

You may also like